PowerBox Professional

Арт. 4330

22 870 р.

Нет в наличии

Производитель:

High-resolution graphic OLED screen with 128 x 64 pixels
Ultra-simple menu-based programming system using the Sensor-Switch Signal amplification for a total of eight channels and twelve servos
Synchronised servo output: all servos operate totally synchronously
16-bit processor for high-speed, high-resolution signal processing
Four match-channels, each for two servos; all servos separately variable
Double regulated output voltage
Sockets for Multiplex MSB and Spektrum downlink bus systems, update capability with USB Interface Adapter for other systems
Direct transmission of both battery voltage values to the transmitter
Voltage display for each battery separately
Servo voltages can be set to 5.9 V or 7.4 V
Minimum value memory displays any voltage collapses
Combined heat-sinks permit high regulator power
Voltage regulator monitor
Supports four battery types: LiPo, LiFePo, NiMH, NiCd
Suppression of any servo feedback currents which may occur
Can also be switched on and off using the MagSensor Update-capable using the PowerBox USB Interface Adapter

Operating voltage	4~9 V
Power source	2 x two-cell LiPO batteries 7,4 Volts; 2 x five-cell NiCd or. NiMH batteries; 2 x two-cell LiFePo batteries 6,6 Volts (A123)
Current drain	Power-on state approx. 130 mA; Power-off state approx. 15 µA
Output voltage	5,9V or 7,4V stabilised
Max. current	2 x 20 A
Dropout voltage	0,3 V
Supported telemetry systems	DSM2/DSMX, M-Link
Channels	8 (4 programmable)
Servo outputs	12
Servo signal resolution	0,5 µs
Selectable signal frame rates	9ms, 12ms, 15ms, 18ms, 21ms
Integral screen	OLED graphic panel 128x64 pixels
Dimensions	110 x 72 x 24 mm
Weight	130 gr.
Temperature range	-30 C to +75 C