PowerBox Cockpit SRS
Арт. 4620
32 220 р.
Нет в наличии
Производитель: 
- For Spektrum and Jeti satellites, Futaba S-BUS and Multiplex M-LINK receivers
- All channels from the receiver are transferred using a three-core lead
- Complete receiver redundancy, double the security
- Complete battery redundancy: two batteries, two electronic switches, redundant output voltage with dual regulation
- Spektrum with four satellites, Futaba with two S-Bus receivers, Multiplex with two M-Link receivers, Jeti with two satellites
- High-resolution graphic OLED screen with 128 x 64 pixels
- Ultra-simple menu-based programming using the SensorSwitch
- Eleven channels + one channel for door sequencer
- Downlink channel transmission for Spektrum and MPX
- Unrestricted channel assignment for all output sockets, (channel output mapping)
- Synchronised servo outputs for totally simultaneous servo movements
- Four-stage user-variable servo frame rate (12 ms, 15 ms, 18 ms, 21 ms)
- Integral freely programmable door sequencer
- The unit saves receiver data, such as "lost frames" and "failsafes", for all connected receivers - whether Spektrum, Futaba, Multiplex, Jeti. Data can be read out after the flight on the OLED screen
- Four match-channels for two servos each; both servos individually variable
- 16-bit processor for high-speed, high-resolution signal processing
- Signal amplification for a total of 12 channels and 21 servos
- Direct transmission of battery voltages and capacities to the transmitter (downlink channels)
- On-screen voltage display for each battery separately, with bar indicator
- Residual capacity display for both batteries separately
- User-variable servo voltage: choice of 5.9 V or 7.4 V
- Minimum value memory shows any voltage collapses
- Large-area heat-sink for high regulator capacity
- Regulator monitor and regulator error indicator
- Supports three battery types: LiPo, LiIon, NiMH / NiCd, LiFePo
- Suppression of any servo feedback currents which might occur
| Bus systems for serial receivers from | Spektrum, Futaba, Multiplex, Jeti |
| Operating voltage | 4~9 V |
| Power source | 2 x two-cell LiPO batteries 7,4 Volts; 2 x five-cell NiCd or. NiMH batteries; 2 x two-cell LiFePo batteries 6,6 Volts (A123) |
| Current drain | Power-on state approx. 130 mAPower-off state approx. 15 µA |
| Dropout voltage | approx. 0,25 V |
| Max. receiver current | 2 x 3 A (stabilised) |
| Max. current | 2 x 20 A |
| Servo signal resolution | 0,5 µs |
| Signal frame rate | User variable: 12ms, 15ms, 18ms, 21ms |
| Screen | OLED 128 x 64 pixels, graphic |
| Servo sockets | 21,12 channels |
| Match channels | 4 |
| Dimensions | 110 x 72 x 24 mm(incl. base plate) |
| Weight | 115 g |
| Temperature range | -30 C to +75 C |
Написать новый отзыв
